I don"t mean to repeat myself throughout the ad, but some people tend not to read what is in the ad. - I do have this listed on craigslist. I will sell it off of ebay. (would actually prefer to).
First off, bought this with intentions of using it for personal use, but have decided that a nice trailer would do the same. (Should have thought about this before)
1990 F450/Superduty Rollback. Aluminum bed. Has a wheel lift to haul car on back. Jerrdan bed that is angled up for lowered cars. The main issue is that the engine has been removed and will need replaced. AGAIN THE ENGINE HAS BEEN REMOVED AND WILL NEED REPLACED. The front grill and core support has been removed to pull the engine. I have all that. I also have the engine and everything with it.
7.3IDI - has cavitation. Heads are removed from the engine. 1 valve was bad. It did run, but she wasn"t healthy. 1st cylinder on each side had some pitting.
5spd Manual
I will try to get pics later. The vehicle does have other minor things. .brake booster leaks, some hydraulic hydraulic leaks, needs throttle cable to run to back of truck. . but the main thing is the engine. Would be great for a wrecker company. I am still looking at replacing the engine, if I do that, it won"t be for sale or will be more.
Project 7.3idi5spdJerr Dan Aluminum bed
Hydraulics and winch work. Some leaks.
Engine needs replaced. Was running and driving before engine removal.
* *Will update.
Attached is a youtube video of it running. I made the video for the smoke, so it might not show much of the truck. To prove the hydraulics work, there is a vehicle on the back of it in the video.
VIDEOS BEFORE REMOVAL. Sorry, but it won"t let me post videos. To watch the videos, type in the youtube website and paste this after .com/watch?v=G77BI6c_gPs (listed as 7.3 idi smoking
IN CURRENT CONDITION. .com/watch?v=wLXGpgB7MjI (listed as 1990 Ford Super Duty Rollback (engine removed)
POTENTIAL QUESTIONS:- Does it come with an engine? Yes, it needs to be replaced or rebuilt. Would recommend a different block to start.- Does it come with a title? Yes, it is actually open. No buyer info on it. - Location? Just outside of Wilmington, NC 28405- What type of bed? Jerr-Dan (Ser. Num. 23145 // Model Num. 19LP85)- Do the hydraulics work? YES - In the videos, you can see there is an SUV on the back and in the more recent video, there isn"t one. PTO works and so do the hydraulics. (some leaks, but expected)
TRADES?I might accept trades. Would like a car trailer and cash. (ideally an aluminum one). Will also trade for another vehicle, but it has to be one that I can sell for a minimum of $4k. I do not want your 97 cavalier and $400.
DELIVERYYou must pick up. I can"t have it sitting too long though. Currently in my storage unit.. I have no ability to deliver.
CONTACTFor any questions, please contact me at 618-980-6865. Call or text at any time! If I do not answer, leave a voicemail.
* **This is a project, but can be a great money maker. I honestly jumped to quick when I bought this. These trucks seem to run about $8k running and driving.
VIDEOSBEFORE REMOVAL. Sorry, but it won"t let me post videos. To watch the videos, type in the youtube website and paste this after .com/watch?v=G77BI6c_gPsIN CURRENT CONDITION. .com/watch?v=wLXGpgB7MjI
I will provide pics in a few days. I couldn"t get them off my phone for some reason.
On Feb-28-16 at 21:58:02 PST, seller added the following information:
Here is a video of the bed...paste this in after youtube .com/watch?v=DW5BwtI1-uM
Or in youtube type 1990 Ford Super Duty Rollback (bed)
To clear up any confusion, here are the titles to the 3 videos in youtube: (filter by past year)7.3 idi smoking 1990 Ford Super Duty Rollback (engine removed)1990 Ford Super Duty Rollback (bed)
On Feb-28-16 at 22:15:39 PST, seller added the following information:
JerrDan Bed Dimensions:
17"10 long . This goes from the very end of the bed all the way up to where the lip stops before to winch. Does NOT include the small area that the winch is in to the light bar. Explained in the video. 95 wide or just under 8" - This is the the measurement between the railing. it is actually mounted to the bed. It is about 91 if you don"t count the flat part on that railing. Technically that flat part has latches so Idk if you should consider that.
WINCH - It is a Ramsey Winch. I"m not sure of the rating. Couldn"t see, but it should be plenty powerful for your needs.
Quick recap on the issues (that I know of) - Engine obviously. cracked windshield, door windows, some hydraulic leaks, brake booster did leak, hydraulic control box on passenger side of bed is damaged, tires are wore, needs throttle cable for the hydraulic controls in the back and needs a cable for the pto. (manually engage it right now). ...Really trying to mention everything I know. Most people wouldn"t notice or care about these smaller things.
The good though: Expensive aluminum rollback bed. I"m sure you know what these run. Hydraulics work. Has the wheel lift. It"s a rollback. Will make you a lot of money.
The title is currently open. No buyer info on it. Was dated from back around mid 2015 if I remember correctly. (If this bothers you due to late fees, let me know. We can come to a deal or compromise if late fees. I don"t think they are much. I got it like this).
$500 non refundable deposit required!!!! Last buyer didn"t even have a way to pick up the vehicle and just told me to keep waiting. I do not like being this way, but some people make it tough. Previous winner can not bid on this again.
Again, this is listed locally for sale. I will sell off of ebay too. Would like this gone sooner than later. I will hold for up to 1 week after the auction. After that, buyer will be responsible for storage fee of $20 per day to hold.