1994 MACK CH613 ROLLBACK
SERIOUS INQUIRIES ONLY!
WE BUILT THIS TRUCK FROM THE GROUND UP APPROXIMATELY TEN YEARS AGO AND IT IS VERY WELL BUILT AND HEAVY DUTY. THE BED WAS REMOVED FROM ONE OF OUR OLDER ROLLBACKS AND INSTALLED ON THIS TRUCK AFTER IT WAS REBUILT AND DOUBLE FRAMED. IT HAS BEEN IN USE EVERY DAY AND HAS BEEN A RELIABLE AND VALUABLE TRUCK TO OUR BUSINESS. WE REALLY DO NOT WANT TO SELL THIS TRUCK BUT, UNFORTUNATELY, WE HAVE DECIDED TO DOWNSIZE OUR FLEET. OUR LOSS IS YOUR GAIN.
817,118 MILES
30,404 HOURS
E-7 350 MACK ENGINE
DOUBLE FRAMED FROM UNDER CAB BACK
24" HEAVY DUTY ROLLBACK/TILT BED WITH DOCK LEVELER/ REAR HYDRAULIC SUPPORT ARM(CYLINDERS WERE JUST RECENTLY REPLACED
DUAL TILT CYLINDERS
BED HAS HEADACHE RACK WITH CHAIN RACK, PROPANE RACK
DRIVER"S SIDE BED CONTROLS ONLY
DECK IS IN GOOD SHAPE BUT NEEDS A FEW PATCHES
OVERALL DECK MEASUREMENTS ARE: 24" X 102 TO RUB RAILS, 22" FROM WINCH TO END OF DECK
20,000 LB. TULSA WINCH
10 SPEED EATON FULLER TRANSMISSION
2 STAGE ENGINE BRAKE
52,000 GVWR
HYDRAULIC PTO SYSTEM FOR BED/WINCH
AIR-RIDE SUSPENSION/AIR-RIDE CAB
IN-CAB SUSPENSION DUMP CONTROL
NEW BRAKES & DRUMS
CURRENT PA STATE INSPECTION GOOD THRU 6/2016
11R22.5 FRONT TIRES/ 11R22.5 REAR TIRES- ALL TIRES ARE APPROXIMATELY 90%
12K FRONT AXLE/ 40K REAR AXLES
52,000 GVWR
DUAL 5 CHROME EXHAUST STRAIGHT PIPES
POWER PASSENGER SIDE MOTO-MIRROR
NEW HOOD-REPLACED LAST NOVEMBER
PASSENGER SIDE DOOR NEEDS REPLACED OR REPAIRED. THE WINDOW CRANK MECHANISM AND THE LATCH MECHANISM BROKE AND WE HAVE NOT HAD A CHANCE TO MAKE THE REPAIRS. WINDOW IS STUCK OPEN AND DOOR IS STUCK SHUT.
DRIVER/PASSENGER ALUMINUM TOOLBOXES
DUAL 75 GALLON ALUMINUM FUEL TANKS
TRUCK IS SOLID WITH NO MAJOR RUST OR LEAKS
TRUCK IS STILL BEING USED DAILY SO MILEAGE MAY VARY
FEEL FREE TO COME AND TAKE A LOOK!
AGAIN, THIS TRUCK RUNS EXCELLENT AND HAS BEEN VERY, VERY RELIABLE. OUR DRIVER"S PREFER TO DRIVE IT OVER THE NEWER TRUCK WE HAVE. WE URGE YOU TO COME TAKE A LOOK BEFORE IT GOES!
IF YOU HAVE ANY QUESTIONS OR WOULD LIKE TO SET UP AN APPOINTMENT TO VIEW THIS ITEM PLEASE FEEL FREE TO CALL US AT:
MACHINERY RIGGING, INCORPORATED
412-823-8890
TERMS & CONDITIONS: ITEM IS SOLD AS IS WHERE IS AND THE SELLER EXPRESSINGLY DISCLAIMS ALL WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE SELLER DOES NOT ASSUME, OR AUTHORIZE ANY OTHER PERSON TO ASSUME ON BEHALF OF THE SELLER, ANY LIABILITY IN CONNECTION WITH THE SALE OF THE ITEM. THE SELLER"S ABOVE DISCLAIMER OF WARRANTIES DOES NOT, IN ANY WAY, AFFECT THE TERMS OF ANY APPLICABLE WARRANTIES FROM THE MANUFACTURER OF THE ITEM. THE BUYER HAS BEEN GIVEN THE OPPORTUNITY TO INSPECT THE ITEM OR TO HAVE IT INSPECTED AND THE BUYER HAS ACCEPTED THE ITEM IN IT"S EXISTING CONDITION. FURTHER, THE SELLER DISCLAIMS ANY WARRANTY AS TO THE CONDITION OF THE ITEM.
| Condition: | Used | VIN (Vehicle Identification Number): | 1M1AA13Y9RW035929 |
| Year: | 1994 | Engine Make: | Mack |
| Make: | Mack | Engine Horsepower: | 350 |
| Model: | CH613 | Fuel Type: | Diesel |
| Type: | SBA | For Sale By: | Private Seller |
| Class: | Class 8 (33,001 lbs. or more) | Transmission Type: | Manual |
| Mileage: | 817,118 | Transmission Speeds: | 10 Speed T-2 |
| Vehicle Title: | Clear | Suspension Type: | Air |
| Number of Axles: | Tandem | Tire Size: | 22.5" |
