Palfinger PCB 43 Series body, PSC 6025 crane (2016)
Sale price: US $19,300.00
Click image to enlarge
NEW 2016 Palfinger 4329-11 Mechanics Body and Crane (Stk #172620)
Body Specs:
PCB 43 Series 11" heavy duty galvannealed steel crane body with standard right rear crane mounting compartment, eight (8) recessed cargo tie downs (6,000 lb capacity), 14 double panel tailgate, tow (2) grab handles, 21 workbench bumper with through compartment, 5/16 plate work surface and integrated hitch receiver tube, 44 high side compartments. Designed to accept up to 43,000 rt/lb rated crane for 84 CA, 19,500 lb GVWR chassis.
Palfinger Model PSC 6025 telescopic crane; 38,500 ft lbs, 25" reach capability, two hydraulic powered extensions, 6,000lb vertical lift capacity, -25 to 75+ degree boom elevation, double acting cylinders with load holding valves on all cylinders, electric overload shutdown system, radio remote control, decals, crane hook, load line block, Ecoat prime, finish paint white topcoat paint and crane tie down bolt kit.
Model PSC 6025 hydraulic telescopic service crane 410 degrees rotation, four-spool proportional control valve, hydraulic planetary drive winch and two-block damage prevention system, PTO hydraulic
Boom support assembly, Adjustable position 16.5 high to 25.5 high
Boom support mounting bracket (weld on threaded plate in lieu of thru-bolts in compartment), Installed
11" CS Raised - 44H sidepacks with Curb side 1st and 2nd raised to 60H
Front manual drop-down stabilizer - PCB 43 mechanics body (requires one each side for stability) may be installed on ship-out body.
Rear power out (crane side) power down stabilizers - PCB 43 or PCB 72 mechanics body
Master locking system - 11" PCB 43 Body (all models)
Oil reservoir - 30 gallon (top deck mount in cargo area) Approx. 9.5 deep x 22 tall x 36 wide
Hydraulic installation kit - PCB 43 for CRANE and AIR COMPRESSOR
11" body, interior rope lighting in 7 compartments (crane box has intergral light)
12V flood light kit (Four Lights) two mounted at rear of body & two mounted at front of body - includes harnesses
Install electrical wiring harness in body
Compressor mounting bracket (weld on bars and loose adapter mounting plate part # 5040715) left front side pack top.
Flexible bumper mounted step, mounted left side of bumper
Weld-on vise mounting plate 9x9
Standard coating - outside primed with multicolor spray finish inside compartments
Body finish topcoat, PCB 43 (white to match cab)
LEFT FRONT - Streetside front vertical compartment (LV1)
Roll out drawer combination; 8-3, 1-5 x 26 wide (9 drawers)
LEFT SECOND - Streetside second vertical compartment (LV2)
Adjustable shelf - 18 x 21 LV2 / RV2 compartment
LH HORIZONTAL - Streetside horizontal compartment (LH)
Adjustable divider tray, LH/RH horizontal compartments, (includes 4 adjustable dividers)
24 LEFT REAR - Streetside rear vertical compartment (LR)
Adjustable shelf - 18 x 26 LR compartment
RIGHT FRONT - Curbside front vertical compartment (RV1)
Tank bracket, oxy/act for (2) tanks, mounted on front wall in vented compartment
Interior partition kit, 60 H compartments, bolt in
Adjustable shelf - 18 x 15 requires interior partition kit
RIGHT SECOND - Curbside second vertical compartment (RV2)
Adjustable divider tray, LV2/RV2 compartment (includes 4 $114.90 $344.70 adjustable divivders)
RH HORIZONTAL - Curbside horizontal compartment (RH)
Adjustable divider tray, LH/RH horizontal compartments, (includes 4 adjustable dividers)
RIGHT REAR - Crane Compartment
Palfinger PPC 37 reciprocating compressed air system; air cooled four cylinder V-twin style, 37 CFM @ 100 PSI, maximum 150 PSI system pressure, weight 200 Lbs. Includes: Hydraulic motor, control valve, integrated hydraulic oil coolers and installation kit.
Cover kit for hose reel hole in crane compartment
(16) gallon air reservoir - PCB 43 mounted under deck parallel with drive shaft (12 x 36),
Hose reel, Reelcraft 3/8 x 50" with guide
1/2 moisture separator/regulator/oiler
Electronic speed control
